More Products
The Silicom Denmark fbC2XGhh card is a 2x10GE capture solution that performs at full line rate with zero packet loss, on both interfaces.
The card is based on the successful four port, full-height fbC4XGG3 card. Similar to the full-height version, the 2x10GE card uses PCIe Gen3, ensuring that no bottlenecks will affect the packet capture to host memory capability.
It is a high performance OEM hardware platform with dual SFP+ ports, and with a form factor of half-height and half-length, it provides a high level of flexibility for integrating into almost any host platform.
The fbC2XGhh card is part of the fbCAPTURE family which provides a powerful and flexible Software API, as well as standard libpcap integration. Through the integration of fbCAPTURE API, applications gain support for all fbCAPTURE cards, covering Ethernet speeds from 1GE to 100GE.
fbC2XGhh – Capture Card:
NETWORK INTERFACE IEEE standard: IEEE 802.3 10 Gbit/s Ethernet Physical interface: 2 x SFP+ ports Supported SFP+ modules:
Data rate: 2 x 10 Gbit/s Ethernet PHY directly embedded in FPGA for full packet control
HOST INTERFACE Physical bus connector: 8-lane PCIe PCIe bus type: 1-8 lane PCIe Gen1/Gen2/Gen3 PCIe compliant 64 logical channels that can be connected to DMA or egressed to physical output ports
ON-BOARD MEMORY 8GB (1x8GB 64 bit DDR3)
PERFORMANCE Capture rate (card internal): Full line rate Capture rate (bursts): Full line rate Capture rate (sustained): Full line rate Transmission rate (inline host DMA): Full line rate Transmission rate (inline bypass): Full line rate Transmission rate (daisy chain): Full line rate
LATENCY Less than 3 μs to host memory Less than 3 μs from host memory to Tx Non-blocking sending, allowing user applications to operate independently
TIME STAMPING & SYNC Resolution = 3.2 ns Accuracy down to 20 ns Optional external synchronization via PPS Master/slave time sync between multiple cards
CONFIGURATION Dual boot images with automatic fallback to fail-safe image Full firmware upgrades via supplied tools or fbCAPTURE API
ENVIRONMENT Physical dimensions: Half length, half height PCIe: 111 x 169 mm Weight: 238g Operational power consumption: Less than 39W Operating temperature: 0 – 55°C, 30 – 130°F Operating humidity: 20 – 80% Hardware compliance: RoHS, CE Passive cooling (No on-board fan required)
ADDITIONAL BOARD SUPPORT fbCAPTURE API On-board temperature sensor Multi-color status LEDs Link and Activity LEDs for each port
Datasheet
10GE Capture Cards: Silicom PB_fbC2XGhh Datasheet