Japan
SINGLEstream™ Link Aggregation Taps |
 |
Collect only the data YOU want and Increase Tool Efficiency
Prevent Port Oversubscription and Data Overload
Line-rate filtering provides you the ability to eliminate unwanted traffic from your analysis tools or security sensors. With less data to work with, network devices run faster and more effectively, and through filtering, you can reduce or eliminate the possibility of port oversubscription. View a Port and IP Address filter example.
Eliminate Bottlenecks – Load Balance your Network and your Network Tools
Using the built-in technologies of link aggregation, regeneration, and filtering, you can quickly and easily load balance both your network and your network tools and eliminate bottlenecks.
- Aggregation lets you load balance your network with confidence. The FSS will combine one or more full duplex streams of data from one or more network segments, reassemble the conversation, and send an exact copy to your connected monitoring device.
- Regeneration allows you to attach more than one device to a single network segment. Connect an analyzer and a security sensor to the same link, and you can troubleshoot your network without having to disconnect your IDS. Add filtering, and you can send only the data you want to each tool, improving monitoring efficiency, speed, and network uptime.
- Regeneration also allows you to connect two or more identical devices to the same link, so you can load balance your tools. Extending the power of regeneration with filtering, you can filter and send data to each tool based on whatever parameter you choose (e.g. IP range). Distributing processes over multiple tools allows them to work faster and reduces or eliminates network bottlenecks that can be caused by slow processing of data.
Monitor Asymmetrically Routed Data with Ease
- Aggregate and reassemble full duplex conversations from multi-trunked links, redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic
- Simultaneously monitor data at multiple points on the network with the same set of devices for a complete end-to-end view of your traffic
Fewer Tools to Manage – Save Time and Money
Aggregation lets you combine multiple network segments into one output of data, so you can use as little as one tool to monitor multiple networks. Central deployment saves time, while fewer tools saves money on deployment and ongoing maintenance and licensing costs.
Empower your Legacy Network Devices
Don’t throw out your old tools – empower them! With proper uses of filtering, you can even use a Gigabit tool to monitor a 10 Gigabit network. Available in fiber and copper, the Filtered SINGLEstream™ Link Aggregation Tap can maximize the ROI of your existing network devices.
| SINGLEstream™ 10/100 Link Aggregation Tap | |
|---|---|
 |
SS-100 |
| Tap: One (1) 10/100 (RJ45) | |
| Datasheet | |
|
The SINGLEstream™ Link Aggregation Tap (SS-100) is a 10/100 passive aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, allowing any connected 10/100 ethernet monitoring device to receive a full duplex stream of data with one network interface card (NIC). |
|
| SINGLEstream™ 10/100/1000 Link Aggregation Tap | |
|---|---|
 |
SS-1204BT-BT-S |
| Tap: One (1) 10/100/1000 (RJ45) Monitor: Two (2) 10/100/1000 (RJ45) Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204BT-BT-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set. |
|
| SINGLEstream™ Link Aggregation Tap (BT) with 2 SFP Monitor Ports | |
 |
SS-1204BT-SFP-S |
| Tap: One (1) 10/100/1000 (RJ45) Monitor: Two (2) SFP Any-to-Any |
|
| Datasheet | |
| The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204BT-SFP-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set. | |
| SINGLEStream™ 10/100/1000 Dual Link Aggregation Tap | |
 |
SS-2206BT-BT-S |
| Tap: Two (2) 10/100/1000 (RJ45) Monitor: Two (2) 10/100/1000 (RJ45) Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ 2200 Series Dual Gigabit Link Aggregation Tap (SS-2206BT-BT-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 2200 Series feature set. |
|
| SINGLEStream™ Dual Link Aggregation Tap (BT) with 6 Monitor Ports (BT/SFP) | |
 |
SS-2210BT-BT/SFP-S |
| Tap: Two (2) 10/100/1000 (RJ45) Monitor: Four (4) RJ4 and Two (2) SFP Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ 2200 Series Dual Gigabit Link Aggregation Tap (SS-2210BT-BT/SFP-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 2200 Series feature set. |
|
| SINGLEstream™ Quad Link Aggregation Tap (BT) with 2 – SFP Monitoring Ports | |
 |
SS-4210-BT-SFP-S |
| Tap: Four (4) 10/100/1000 (RJ45) Monitor: Two (2) SFP Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ Quad Link Aggregation Tap contains four (4) network taps. Each tap combines both directions of a full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data collected from all four taps – even in a single trace file. |
|
| SINGLEstream™ Link Aggregation Tap (SX) with 2 – 10/100/1000 Monitor Ports | |
|---|---|
 |
SS-1204SX-BT-S |
| Tap: One (1) Duplex LC Multi-mode [50 or 62.5 Micron] Monitor: Two (2) 10/100/1000 (RJ45) Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204SX-BT-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set. |
|
| SINGLEstream™ Link Aggregation Tap (LX) with 2 – 10/100/1000 Monitor Ports | |
 |
SS-1204LX-BT-S |
| Tap: One (1) Duplex LC Single Mode [9 Micron] Monitor: Two (2) 10/100/1000 (RJ45) Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204LX-BT) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set. |
|
| SINGLEstream™ Link Aggregation Tap (LX) with 2 SFP Monitor Ports | |
 |
SS-1204LX-SFP-S |
| Tap: One (1) Duplex LC Single Mode Tap [9 Micron] Monitor: Two (2) SFP Any-to-Any |
|
| Datasheet | |
| The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204LX-SFP-S) is an LX aggregator tap that combines both directions of a full duplex ethernet data stream and hands them off to monitor tools (SFP Ports) in one single stream of data, while also allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set. | |
| SINGLEstream™ Dual Link Aggregation Tap (SX) with 2 SFP Monitor Ports | |
 |
SS-2206SX-SFP-S |
| Tap: Two (2) Duplex LC Multi-Mode Taps (50 or 62.5 Micron) Monitor: Two (2) SFP Any-to-Any |
|
| Datasheet | |
| The SINGLEstream™ Dual Link Aggregation Tap (SS-2206SX-SFP-S) is a configurable SX aggregator tap that will tap two links, combining both directions of the full duplex ethernet data stream from both, handing the data off to up to two (2) monitor tools (SFP Ports) in one single stream of data, while also allowing the ability to steer your traffic to specific ports using the new 2200 Series feature set. | |
| SINGLEstream™ 10 Gigabit Link Aggregation Tap (LR, SR, or ER) | |
|---|---|
 |
SS-1204-10G-F |
| Tap: One (1) Network Tap with Dual LC Connectors Monitor: Two (2) XFP Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ 1204-10G can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Hardware-filtering can be applied to customize data flow to each tool and eliminate port oversubscription. |
|
| SINGLEstream™ 10 Gigabit Link Aggregation Tap with 4 – XFP Monitoring Ports | |
 |
SS-1206-10G-F |
| Tap: One (1) LR, SR, or ER network tap (dual LC connectors) Monitor: Four (4) – XFP Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ 1206-10G-F can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Up to four (4) connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Line-rate hardware filtering can be applied to customize data flow to each tool and eliminate port oversubscription. |
|
| SINGLEstream™ 10 Gigabit Network Tap (10 – 10G Taps, 2 – 10G Monitoring Ports) | |
 |
SS-2212-10G |
| Tap: Ten (10) SR or LR Network Taps with Dual LC Connectors Monitor: Two (2) SR or LR Monitoring Ports |
|
| Datasheet | |
| The SINGLEstream™ SS-2212-10G In-Line fiber network tap allows you to direct a copy of traffic from any of the ten tapped network links and send the copy to one or both monitoring tools. Passive and non-intrusive visibility is available for two 10G monitoring tools. | |
| SINGLEstream™ Gigabit to 10 Gigabit Link Aggregation Tap (5-LX or SX Taps) | |
 |
SS-1214-10G-F |
| Tap: Five (5) SX or LX Network Taps with Dual LC Connectors Monitor: Four (4) XFP Any-to-Any |
|
| Datasheet | |
| The SINGLEstream™ 1214-10G can combine data from up to five fiber Gigabit network segments into one or more streams of data. Connected 10 Gigabit monitoring devices can receive aggregated data from multiple network segments with just one network interface card (NIC) each. Hardware-filtering can be applied to customize data flow to each tool. | |
| Filtered SINGLEstream™ Dual-Link Aggregation Tap | |
|---|---|
 |
FSS-2000 |
| Datasheet | |
| The Filtered SINGLEstream™ Dual Link Aggregation Tap gives you the power to apply port level packet filtering to your in-line monitoring solutions to ensure your network and security tools only get the data they need. | |
| SINGLEstream™ 10 Gigabit Link Aggregation Tap (LR, SR, or ER) | |
|
SS-1204-10G-F |
| Tap: One (1) Network Tap with Dual LC Connectors Monitor: Two (2) XFP Any-to-Any |
|
| Datasheet | |
|
The SINGLEstream™ 1204-10G can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Hardware-filtering can be applied to customize data flow to each tool and eliminate port oversubscription. |
|
|
SINGLEstream™ 10 Gigabit Link Aggregation Tap with 4 – XFP Monitoring Ports |
|
|
SS-1206-10G-F |
| Tap: One (1) LR, SR, or ER network tap (dual LC connectors) Monitor: Four (4) – XFP Any-to-Any |
|
| Datasheet | |
| The SINGLEstream™ 1206-10G-F can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Up to four (4) connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Line-rate hardware filtering can be applied to customize data flow to each tool and eliminate port oversubscription. | |
|
SINGLEstream™ Gigabit to 10 Gigabit Link Aggregation Tap (5-LX or SX Taps) |
|
|
SS-1214-10G-F |
| Tap: Five (5) SX or LX Network Taps with Dual LC Connectors Monitor: Four (4) XFP Any-to-Any |
|
| Datasheet | |
| The SINGLEstream™ 1214-10G can combine data from up to five fiber Gigabit network segments into one or more streams of data. Connected 10 Gigabit monitoring devices can receive aggregated data from multiple network segments with just one network interface card (NIC) each. Hardware-filtering can be applied to customize data flow to each tool. | |
For more information, please contact us.
SINGAPORE