Bypass Switches

Net Optics 96475 Bypass Switch

Bypass Switches provide a trouble-free access port for in-line network security and monitoring devices. The Bypass Switch with Heartbeat sends a heartbeat packet to the device, protecting network traffic against link, application, and power failure on the attached in-line device.


Read More...

DURAstream™ Bypass Switches

Datacom Systems DURAstream DS-4000 Bypass Switch

DURAstream™ Bypass Switch ensures your network’s most important data does not fail even when in-line devices do. Deploying a DURAstream™ Bypass Switch ensures uptime of critical links regardless of in-line device performance by diverting critical network traffic away from malfunctioning in-line devices until such devices are operating normally. This not only alleviates potential issues with traffic congestion affecting link behavior caused by an IPS, it allows maintenance and upgrades of attached in-line tools without network downtime.


Read More...

Director xStream Pro

director-xstream-pro-network-controller-switch

Director xStream Pro is engineered with sixteen standard ports plus eight ProPorts™ sharing the same non-blocking switching fabric. The ProPorts are smart ports that provide True Timestamping, Dynamic Load Balancing, Deep Packet Inspection, and other intelligent capabilities.


Read More...

Director xStream

director-xstream-data-monitoring-switch-1

Net Optics Director xStream is a 10 Gigabit monitoring access solution that provides regeneration, aggregation, and smart filtering on a single device.


Read More...

Director Pro

director-pro-network-controller-switch

The world’s most advanced Network Controller Switch – Director Pro is a “Smart Filtering” appliance that controls and directs traffic of interest to monitoring tools by filtering, dynamic load balancing, and with deep packet inspection.


Read More...

XX-series™

PROFITAP XX-32G Network Tap and XX-Manager

All products within the XX-series ™ are budget oriented solutions for consolidating Data Monitoring Traffic for versatile use with any kind of Analysis Appliances.
Designed for aggregation of multiple In-Line and/or Span inputs for Monitoring Tools its modularity offers a wide range of usage.


Read More...

Director

director-data-monitoring-switch

Net Optics Director™ is a “Smart Filtering” appliance that directs traffic of interest to monitoring, security and compliance tools.


Read More...

xBalancer

xBalancer

Net Optics xBalancer™ is the first appliance that is purpose-built for distributing a traffic load to multiple tools. With its 24 SFP+ ports and integrated data rate conversion, it is ideal for balancing traffic from 10G links to multiple 1G tools. It can also aggregate traffic from multiple 1G and 10G links and distribute it to 1G or 10G tools.


Read More...

Aggregation Taps

TPACU

Simple and ultra-efficient, Net Optics’ Aggregator Taps provide access to full-duplex links using just a single NIC on the monitoring or analyzer tool.


Read More...

iTaps

Net Optics ITP-PAD-CU3 iTap

iTap products provide link utilization, traffic statistics, and alarms via a front panel display as well as software management utilities.


Read More...

SINGLEstream™ Link Aggregation Taps

ss-2212-front-copy

Datacom Systems’ SINGLEstream™Link Aggregation Taps provides a superior solution for 24×7 monitoring of full-duplex Ethernet links.

While traditional taps might enable full-duplex monitoring of all traffic on a network link, they transmit the data to the monitoring device (e.g. analyzer, IDS, probe) in two separate half-duplex streams. Not only does this require the monitoring device to have two network interface cards (NIC), it also requires that the device be capable of combining and processing both streams of data in order to monitor both sides of the conversation. Not all monitoring devices have that capability.

The SINGLEstream™ Link Aggregation Tap faultlessly combines the two data streams, allowing any connected monitoring device to receive a full-duplex stream of data with one NIC.


Read More...

VERSAstream™ Data Access Switches

vs-1212-f-front-copy-960c

The VERSAstream™ Data access Switches can combine data from multiple Ethernet network segments into one stream of data. A single Gigabit device, such as an intrusion detection system, protocol analyzer, or network probe can receive the aggregated data with just one network interface card (NIC).


Read More...

Standalone Media Converters

BC-GTXX1

Canary Communications was founded in 1987 to design, develop, and produce innovative connectivity products, specializing in the Ethernet Local Area Network market.


Read More...

Fiber Network Taps

f1psbig

PROFITAP’s Fiber Taps monitor traffic at maximum wire speed. Invisible to the network, non-intrusive for 100% security, copy all 7 layers and cause no point of failure. They offer a perfect and cost effective solution to tap networks for IDS (security), SNMP (management), RMON (remote) and Protocol analysis.


Read More...

Copper Network Taps

c1r-100big2

The Copper Network Taps are delivered with everything you need to easily transport it. The Dual compartment Zipper Pouch protects the Tap and the accessories. It is highly portable and offers the most complete and cost effective solution for the field service engineer.


Read More...

Industrial Taps

C1AP-1G-ISO

Designed for usage with every software based Sniffer this universal TAP fits into engineers toolbox, reducing equipment to be carried around to a minimum.


Read More...

nTaps

Network Instruments 10/100 Copper nTap Deployment

Install Aggregator nTAPs on 10 Mb, 100 Mb, or 1 Gb links for quick, anytime access to network traffic. Designed for low-to-moderate utilization full-duplex links, Aggregator nTAPs merge data into single streams for transmission to up to two single-receive analysis devices. Industry-leading buffer sizes offer less likelihood of lost packets than SPAN ports to ensure critical traffic reaches analyzers, remote monitoring appliances, and forensics tools. For networks and analyzers of different topologies, a Conversion Aggregator nTAP is available.


Read More...

Regeneration Taps

96552-8

Net optics Regeneration Taps replicate network traffic into multiple streams for simultaneous network monitoring on important links with multiple security and traffic management tools.


Read More...

Network Taps

TP-CU

Fast and reliable, Net Optic’s network taps provide access for security and network management devices on all types of networks. 100% visibility to link traffic for your security and network monitoring tools In-line link failover protection. Access ready connectivity.


Read More...

Network Taps

10-100-1000-tap-front-copy-960c

Network Taps provides easy access to segments while maintaining network integrity with “no break the link” design. Network performance will not be affected by power loss.


Read More...

Physical Layer Matrix Switches

Physical Layer Matrix Switch

Datacom Systems’ Physical Layer Matrix Switches increases network visibility and leverages your investment in network analyzers, probes, and security equipment. Greater visibility accelerates problem resolution, reduces downtime, increases enterprise productivity, and improves ROI.

All Datacom Systems matrix switches are compatible with all vendor hardware and can be controlled by MANAgents™ switch control software, which will allow you to control all of your matrix switches through a single interface regardless of what network appliances you choose to deploy.


Read More...